Rinocote Roof Armour is a super tough, long-life roof membrane that will beautify your home, add value, and protect your roof against New Zealand’s harsh climate and extreme conditions for decades to come.
Rinocote has four unique roof membrane systems that can be applied to a range of substrates including: pressed metal tile, concrete tile and galvanised iron/faded steel.
For optimal performance and longevity, each roof type requires a specific coating system. Avoid companies who offer “ordinary paint” as the one solution for all roof types.
Rinocote is applied approximately 150% thicker than ordinary paint, providing optimal protection for your roof.
No, renewing your roof in Rinocote Roof Armour generally works out to be half the price of a new total roof replacement, and in most cases not a lot more expensive than an average ordinary paint job.
Absolutely! A home with an attractive roof in good condition will sell more quickly and at a higher value than a house with a roof in poor condition.
Your roof is approximately a third of the exterior of your home and if not maintained will require costly replacement.
Many homeowners will renew their roof with Rinocote Roof Armour prior to selling their homes so they can price them at the top end of the market.
Yes, all roof substrates are repaired and cleaned before Rinocote Roof Armour is applied.
The full price of all the necessary repairs will be included in our quote.
Yes, Rinocote Roof Armour comes with a 15 year product manufacturers warranty.
Terms and conditions apply.
The Rinocote application process largely depends on the size and complexity of the roof and also the weather.
Typically an average sized residential roof can take up to three weeks to complete the entire process, including installation and removal of site safety equipment.
For more info on the Rinocote Roof Armour process, click here.
Roof Doctors are the exclusive applicators of Rinocote Roof Armour systems in New Zealand.
Yes you can! This is an excellent opportunity to upgrade the exterior appearance of your home.
Rinocote comes in many colours ranging from old favourites to the latest available.
Please discuss your options with your Roof Doctor, we are happy to assist.
Yes, all Rinocote Roof Armour systems have no VOC and are fully acrylic.
Rinocote’s manufacturer Ironbark Technology Ltd. is a member of the New Zealand Green Building Council.
Yes, we provide scaffolding, fall protection or anchor points and harness as the situation requires.
Yes, however you must disconnect the water tank throughout the process and leave it disconnected for at least 4 rainfalls (minimum 40ml per rainfall) post-application.
Yes, please let us know if you would like us to include this in your quote.
When inspecting your roof if we find that your spouting is in poor condition, we will let you know and recommend a replacement.
Our dedicated customer support team will ensure you’re kept up to date with the progress of your roof.
We will complete a full site safety analysis, arrange for powerlines to be wrapped and fall protection to be installed where required to complete the Rinocote Roof Armour application.
All defective concrete tiles, ridge and hip caps will be replaced. Metal valleys and flashings will be repaired or replaced if required.
Blitzit Hyper Clean will be applied to the tile surface to treat and remove moss/mold, lichen and grime.
The roof surface will be power washed to ensure it is totally clean and free of contaminants before the Rinocote Roof Armour is applied.
All cracked and damaged mortar will be re-flushed with Rinocote Flushplast.
Your licensed Roof Doctor technician will apply Rinocote’s high penetration sealer to seal the tile surface.
We will then apply the Rinocote Roof Armour system to the tile surface at the required thickness.
Once the Rinocote application is complete your site will be left clean and tidy, followed by the removal of all site safety equipment.
